Product Overview; Drive Installation - Icy Box IB-RD3802-C31 Handbuch

Product overview

2bay RAID system with features as follows:
Key features
• For 2x 3.5" SATA I, II, III (6 Gbit/s) drives, drive capacity unlimited
• Supports RAID 0/1/LARGE/SINGLE, automatic rebuilding
• LED indicators show the system status and drive errors
• USB 3.1 (Gen 2) host interface with up to 10 Gbit/s
• Easy Swap - HDD exchange without tool
®
• 60 mm fan for optimal cooling and performance
• Front doors lockable by key
• Plug & Play and Hot Swap
System Requirements:
• Host PC with an available USB Type-C
• The IB-RD3802-C31 is also working with computers/notebooks with Type-C
Thunderbolt 3 interfaces. The full transfer rate up to 10 Gbit/s can only be reached, if the
™
USB 3.1 (Gen 2) protocol is supported.
• macOS and Windows 10
®

Drive installation

Note! When connecting the hard drive, please note the electrostatic! Body's static electricity may
cause malfunction of the device. Please touch a metal object to discharge or wear antistatic gloves
before the operation.
Attention!
PCB of this device and HDDs are precision machinery, please be careful do not collision and please
notice the direction of the HDDs.
Be careful the cutting edge inside may cut hand!
If hard disk already contains data, please backup data before installation to prevent data loss.
- Open the front doors by pulling the handle
- Put the drives into the related slot
- Gently close the front doors until they engage.
Manual IB-RD3802-C31
port
™
®
USB 3.0/2.0 and
™