Battery Replacement - TFA 60.2547 Bedienungsanleitung

TFA_No. 60.2547_Anleitung_12_21
Radio-controlled alarm clock
• To activate the corresponding alarm function, move the ALARM switch
upwards (ON).
• The alarm time with the activated alarm symbol appear on the display.
• When the adjusted alarm time is reached, the alarm rings.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• If the alarm is not stopped manually, the ascending alarm tone auto-
matically turns off after two minutes and it will be reactivated at the
same set time on the following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze
function is activated.
• Once the snooze function is activated, the snooze symbol will be flash-
ing on the display.
• The alarm will be interrupted for 5 minutes.
• To deactivate the corresponding alarm function, move the ALARM
switch downwards (OFF). The alarm symbol disappears.
7. Backlight
• Press the SNOOZE/LIGHT button.
• The backlight turns on for 8 seconds.
• The device is provided with a light sensor to turn on the light automati-
cally when it is dark.
28
18.12.2021 12:01 Uhr Seite 15
Radio-controlled alarm clock
• Use the AUTO LIGHT ON/OFF switch at the back to activate or deactivate
the automatic backlight.
8. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scour-
ing agents.
• Remove the batteries if the device will not be used for an extended
period of time.
• Keep the device in a dry place.

8.1 Battery replacement

• Change the batteries when the device functions become weak.
• Open the battery compartment and insert two new AA 1.5 V batteries,
polarity as illustrated.
• Close the battery compartment again.
9. Troubleshooting
Problem Solution
➜ Ensure the batteries' polarity are correct
No display
➜ Change the batteries
29