Safety Instructions - DeWalt DWS778 Handbuch

CROSS-CUT MITRE SAW
DWS778
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter
Blade bore
Max. blade speed
Cutting depth
Max. blade thickness
Mitre (max. positions) left and right
Bevel (max. positions)
Compound mitre
Capacities
cross-cut 90°
mitre 45°
mitre 48°
bevel 45°
bevel 48°
Overall dimensions
Weight
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
L
P,PEAK
K
P,PEAK
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
WALT one of the most
E
DWS778
QS/GB
V 230
V 230
1
W 1850 1650
mm 250
mm 30
-1
min 4300 4100
mm 85
mm 1.75
50°
left 48°
bevel 45°
mitre 45°
mm 85 x 305
mm 85 x 215
mm 85 x 204
mm 58 x 305
mm 54 x 305
mm 465 x 615 x 390
kg 17.2
dB(A) 94.2
dB(A) 3.0
dB(A) 107.2 107.2
dB(A) 3.0
dB(A) 115.6 115.6
dB(A) 3.0
m/s² 2.4
m/s² 1.5
Fuses
Europe
U.K. & Ireland
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply
system with maximum permissible system impedance Zmax of
0.25 Ohm at the interface point (power service box) of user's supply.
LX
The user has to ensure that this device is connected only to a power
system which fulfils the requirement above. If necessary, the user can
115
ask the public power supply company for the system impedance at the
115
interface point.
1
Defi nitions: Safety Guidelines
250
The definitions below describe the level of severity for each signal word.
30
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation
85
which, if not avoided, will result in death or serious injury.
1.75
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
50°
injury.
48°
CAUTION: Indicates a potentially hazardous situation
45°
which, if not avoided, may result in minor or moderate
45°
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
94.2
3.0
EC-Declaration of Conformity
3.0
MACHINERY DIRECTIVE
3.0
DWS778
D WALT declares that these products described under Technical Data
E
are in compliance with: 2006/42/EC, EN 61029-1, EN 61029-2-9.
2.4
These products also comply with Directive 2004/108/EC and
1.5
2011/65/EU. For more information, please contact D
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
01.11.2012

Safety Instructions

WARNING! When using electric tools, basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and personal injury including the
following.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
WALT.
E
E NG L I S H
WALT at the
E
23