Beginning Work With The Machine - diversey TASKI swingo 755B Economy Bedienungsanleitung

Beginning work with the machine

Warning:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Notice:
Whilst operating the machine always keep both
hands on the steering wheel / driving handle, so
that safe operation is guaranteed.
Warning:
Start familiarization with the machine by making
your first driving attempts in a free area.
Warning:
If there is a danger of falling objects during use of
the machine, the necessary safety precautions
must be taken or adhered to in accordance with na-
tional regulations.
• Lower the squeegee.
• Unlock the foot pedal and lower the
tool slowly.
Cleaning start
• Switch the machine on.
The indicator elements lights up briefly.
• Press the suction unit ON/OFF but-
ton.
The display lights up; the suction en-
gine starts.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start-
ed when the brushes rotate.
• Use the quantity control to dose the
cleaning solution.
66
Notice:
Diversey recommends a sustainable working by de-
termination of the correct product dosing quantity.
Overdosing or underdosing will lead to unsatisfactory
cleaning results.
• Pull the switch bracket drive on the
driving handle.
The tool starts to rotate and the
cleaning solution supply starts.
Power off function
Notice:
The machine turns itself off after 5 minutes when no
longer in use.
During these 5 minutes:
• the brushes may not be manipulated in any way.
• the user must not leave the machine out of sight.
• sucked in or jammed objects may be cleaned from the
squeegee only.
• the user is only allowed to leave the machine in order to
clear the work space. The user must maintain visual con-
tact.
Battery capacity - end of operational readiness
The battery level indicator provides information on the available oper-
ating time.
• If the red indicator begins to flash, approx. 5 minutes of
residual working time are left.
• After that the brush unit is lifted. The red display switches
to continuous light.
• Now 10 more minutes remain for driving the machine to the
charging station. Then the machine is automatically
switched off.
• In order to restart, the batteries must be fully charged.
Cleaning method
Direct working method:
Scrubbing and suction in one work step.
Indirect working method:
Applying the cleaning solution, scrubbing and suction in several work
steps.
Notice:
The machine guiding might be impaired in case of
special combinations of flooring/contamination
and cleaning product.
- Optionally available wheels can improve the traction
of the machine on the floor. Please contact your TAS-
KI customer consultant.