Remote control
ON / OFF
SPEED
TIMER
44
Remote control
Install batteries:
Slide open the cover according the direction indicated
by arrowhead. Put into two brand new AAA batteries,
position the batteries to right electric poles (+/-). Put
back the cover.
(Please note that not all buttons on the remote control
are active, such as "Turbo, Swing, iFeel, etc.
Compare the buttons to your control panel.)
You can start or stop the air-conditioner by pressing
this button.
You can select fan speed as the following :
Low - Mid - High - Auto
Setting the ''ON" timer time:
a. When remote controller is at off state, press ''TIM-
ER" button, the LCD displays ''TIMER ON" and the
timer time, the range of setting time is 0 .5h to 24 h.
b. You can press the ''▲" or "▼" button to adjust the
timer time, each touch will be set time to increase or
reduce 0.5h before 10 hours ago, after ten hours will
be set time to increase or reduce 1h per pressing, to
enables your required timer.
c. Press ''TIMER " button again, to set the timer an
function.
d. You can set another function to insure the suitable
state after air conditioner turn on (including mode,
temperature, fan speed, etc). The LCD will displays all
your setting and keep it, when the timer reach to the
set time, the air conditioner will be working according
to your set automatically.