Temperature / Fan Speed; Filter Reset - Fakir trend AC 70 Bedienungsanleitung

Mode (3)
- and + (4)
Fan speed (5)

Filter reset (6)

Operation
Drying operation mode:
Press the mode button until the dry indicator
up. The fan will run at a fix speed at this mode. Close
windows and doors for the best dehumidifying effect.
The setting temperature is 25 °C (77 °F) and the fan
speed is low, these settings can't be adjusted.
Fan:
Press the mode button until the fan indicator
up. Press the fan speed button to select the desired
speed. The setting temperatur can't be adjusted.
In fan mode you do not have auto fan speed.
Temp.indicator:
Each time the + or - button is pressed, the setting
temperature will increase or decrease by 1 °C (1 °F).
The setting temperature ranges from 16 °C (60 °F) -
32 °C (90 °F).
By pressing + and - button at the same time for 3
seconds, the display will toggle between Celsius and
Fahrenheit.- In cooling mode, when + or - button is
pressed, the setting temperature is displayed and be
adjusted.
- In auto and cooling mode, temp.indicator display is
setting temperature.
- In dry and fan mode, temp.indicator display is room
temperature.
By pressing this button you can select the fan speed
as follows:
Auto - high - med - low
After the running time of the unit has reached 250
hours, the filter reset indicator lights up and the air
filter should be cleaned. After cleaning, press the
button, the filter reset indicator light will turn off and
the running time will be cleared. If you don't press the
button when the indicator light illuminates, the indica-
tor light will always illuminate except the unit power is
off.
lights
lights
43