Operating Features - urmet 1096/310 Bedienungsanleitung

Operating features

Zoom movement and focus adjustment of the cameras (only 1096/312)
The camera has an Autofocus lens that adjusts the focus of the image autonomously..
It is also possible to move the zoom and manually adjust the focus through the 1092/310 Remote or
through the UTC interface of the HVR devices in the Urmet catalogue. The zoom can be moved and the
focus can be adjusted using the arrow keys of the Remote or of the HVR remote control graphic interface.
The zoom is adjusted using the UP and DOWN arrows; the focus is adjusted using the RIGHT and LEFT
arrows
Accessing the camera OSD menu
Using the UTC interface, through the 1092/310 Remote or through the use of the HVR devices in the Urmet
catalogue, the OSD menu of the cameras can be accessed by pressing the central button of the Remote or
of the graphic interface of the HVR remote control and then scrolling through the menus using the arrow
buttons.
Refer to the respective product manuals for using the controls.
For using the 1080P and 1080N series HVRs, refer to the complete manual of these cameras which can be
downloaded from Urmet website.
MENU USE
The camera uses a multi-level menu that allows to enable/disable or change camera settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
Once the item has been selected, the parameter can be changed choosing among the available options.
By selecting the item associated to the symbols or it is possible to access to the next submenu,
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item EXIT→ SAVE&END
and press the central button.
To reactivate the default values select the item EXIT→ RESET and press the central button.
16
DS1096-121A