Operating Features - urmet 1092/278HZ Schnellanleitung

4. Connect the video output to the selected terminal device.
5. Connect the power JACK to the power supply unit and power-on the camera
6. Adjust lens angle, slant and rotation, in order to capture correctly the selected images
8.

OPERATING FEATURES

MENU setting
TO SELECT THE VIDEO OUTPUT
The 1092/278HZ camera may use 3 different video outputs, which are on the same BNC connector:

High-definition 1080P AHD (Analog High Definition) video output

CVBS standard interlaced video output

Video output in COMET mode
DS1092-244
360°
UNSCREW THE PLUG TO MAKE
THE CABLE COME OUT
ATTENTION.
reflections on the image, it's
Max 75°
strongly recommended not to
overtake the indicated slant.
360°
UP
LEFT
SET
DOWN
To avoid
RIGHT
7