Operating Features - urmet 1096/401 Schnellanleitung

ENGLISH
INSTALLATION
1 Make sure that no units are powered before starting the installation procedure.
2 Install the camera on the bracket and fasten it.
3 Position the bracket to frame the required picture and fasten it to the wall or other flat surface.
4 Connect the video output to the utility.
5 Power the camera.

OPERATING FEATURES

The camera may be operated using the UTC controls available on the DVR/HDVR of the Urmet catalogue
implementing the function. Refer to the complete product documentation on the Urmet website to check for
the list of available devices.
These controls can be used to access the OSD menu. The access to the menu is also possible through the
button of the remote present on the cable of the camera.
PUSH BUTTON TO ACCESS
TO THE MENU ALONG THE
CAMERA CABLE
Refer to the respective product manuals for using the controls.
TO SELECT THE VIDEO OUTPUT
The camera may use 2 different video outputs, which are on the same BNC connector:

High-definition AHD (Analog High Definition) video output

CVBS standard interlaced video output
If pressing the menu access button to the LEFT for a few seconds, you can select the AHD video output. If
pressing it for a few seconds to the UP, you can select the CVBS video output.
MENU USE
The camera uses a multi-level menu that allows to enable/disable or change camera settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
Once the item has been selected, the parameter can be changed choosing among the available options.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item SAVE-EXIT and press
the central button.
To reactivate the default values select the item EXIT and press the central button.
Quick guide and complete user manual of the product are available at the following
link
Quick guide and complete user manual of the product are also available for DOWNLOAD from the URMET
website under the section USER MANUALS.
DS1096-012A
or it is possible to access to the next submenu,
3