Firmware Update; Dismounting - OSRAM e:cue SYMPL Installationsanleitung

Firmware Update

i
The employment of a discrete network is recommended.
i
Note down all employed and, if applicable, reserved IP
addresses. Keep the information for future network
configurations.
i
You can change the login password to the
SYMPL e:bus Node's configuration page and the device
name of the SYMPL e:bus Node at "Settings" page. Do not
forget the new password.
6 Firmware Update
To update the SYMPL e:bus Node, a connection of the SYMPL e:bus Node
to SYMPHOLIGHT is required.
Updating with SYMPHOLIGHT
Use the usual update options in the Device Tree of the Setup tab in
SYMPHOLIGHT: select "Update firmware" in the context menu of the
SYMPL e:bus Node or click the Update button
7

Dismounting

Disconnect all attached cables. Dismount the e:cue SYMPL e:bus Node
from the rail by pulling the black DIN rail handle and unhitching the SYMPL
Node. The dismounting is completed.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
18
in the head toolbar.