Default Network Properties; Network Configuration With Sympholight - OSRAM e:cue SYMPL Installationsanleitung

Network configuration
network configuration. You can either adjust the network settings with
SYMPHOLIGHT or using the web interface of the SYMPL e:bus Node.
5.1

Default network properties

The SYMPL e:bus Node has as factory setting the default IP address
192.168.123.1.
DHCP is enabled by default.
To change the network configuration use either SYMPHOLIGHT or the web
interface of the SYMPL e:bus Node:
5.2

Network configuration with SYMPHOLIGHT

1. Open the context menu of the SYMPL e:bus Node in the Setup tab
of SYMPHOLIGHT by a right-click on the device.
2. Select "Configure Network":
3. Define the IP address, the subnet mask and the DHCP settings to
your needs:
4. Click "Apply" to submit the changes.
16