General Device Description; Delivery Content - OSRAM e:cue SYMPL Installationsanleitung

General device description

2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX512, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The e:cue SYMPL e:bus Node is a single channel e:bus interface for use
with e:cue's lighting control solution SYMPHOLIGHT. It provides an e:bus
interface for up to eight e:bus devices like e:cue GLASS TOUCH terminals.
The e:cue SYMPL e:bus Node is powered by an external power supply or
via Ethernet PoE. It is easily mounted on standard 35 mm DIN rails, or with
a key hole in the housing base on walls or on any stable vertical surface.
The e:cue SYMPL e:bus Node is a simple, reliable and easy to use interface
solution for e:cue lighting control solutions with SYMPHOLIGHT.
To operate SYMPL Nodes a SYMPHOLIGHT version 2.0 or
i
higher is mandatory. Earlier versions do not support the
SYMPL Nodes. SYMPL Nodes are not supported by the
e:cue Lighting Application Suite.
e:cue SYMPL e:bus Node is not hot-pluggable.
i
2.1

Delivery content

Delivery content for the e:cue SYMPL e:bus Node (AB444210035):
1. e:cue SYMPL e:bus Node
2. Safety instructions
3. Installation guide (English only)
08