Firmware Update; Dismounting - OSRAM e:cue SYMPL serial Node Installationsanleitung

Firmware Update

i
Note down all employed and, if applicable, reserved IP
addresses. Keep the information for future network
configurations.
i
You can change the login password to the
SYMPL serial Node's configuration page and the device
name of the SYMPL serial Node at "Settings" page. Do not
forget the new password.
6 Firmware Update
To update the SYMPL serial Node, a connection of the SYMPL serial Node
to SYMPHOLIGHT is required.
Updating with SYMPHOLIGHT
Use the usual update options in the Device Tree of the Setup tab in
SYMPHOLIGHT: select "Update firmware" in the context menu of the
SYMPL serial Node or click the Update button
7

Dismounting

Disconnect all attached cables. Dismount the e:cue SYMPL serial Node
from the rail by pulling the black DIN rail handle and unhitching the SYMPL
Node. The dismounting is completed.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
18
in the head toolbar.