Network Configuration With The Web Interface - OSRAM e:cue SYMPL Installationsanleitung

The network configuration of the SYMPL e:bus Node is completed.
5.3

Network configuration with the web interface

1. Open a common web browser on a connected PC. Enter the
SYMPL e:bus Node's IP address into the address bar:
e.g. http://192.168.123.1
The web interface of the SYMPL e:bus Node is displayed:
2. Click "Configure" to access the network configuration page:
3. Define the network settings at "Device Basics" to your needs. You
can also change the password for entry to the web interfaces of the
SYMPL e:bus Node here.
4. Click "Submit" to apply the settings.
The network configuration of the SYMPL e:bus Node is completed.
Network configuration
17