Network Configuration With The Web Interface - OSRAM e:cue SYMPL serial Node Installationsanleitung

5.3

Network configuration with the web interface

1. Open a common web browser on a connected PC. Enter the
SYMPL serial Node's IP address into the address bar:
e.g. http://192.168.123.1
The web interface of the SYMPL serial Node is displayed:
2. Click "Configure" to access the network configuration page:
3. Define the network settings at "Device Basics" to your needs. You
can also change the password for entry to the web interfaces of the
SYMPL serial Node here.
4. Click "Submit" to apply the settings.
i
The employment of a discrete network is recommended.
The network configuration of the SYMPL serial Node is completed.
Network configuration
17