Default Network Properties; Network Configuration With Sympholight - OSRAM e:cue SYMPL serial Node Installationsanleitung

Network configuration
5.1

Default network properties

The SYMPL serial Node has as factory setting the default IP address
192.168.123.1.
DHCP is enabled by default.
To change the network configuration use either SYMPHOLIGHT or the web
interface of the SYMPL serial Node:
5.2

Network configuration with SYMPHOLIGHT

1. Open the context menu of the SYMPL serial Node in the Setup tab
of SYMPHOLIGHT by a right-click on the device.
2. Select "Configure Network":
3. Define the IP address, the subnet mask and the DHCP settings to
your needs:
4. Click "Apply" to submit the changes.
The network configuration of the SYMPL serial Node is completed.
16