Klarstein Kingsville XL Bedienungsanleitung Seite 45

How to Change a Gas Cylinder
Note: Close the gas cylinder regulator (no wrench is required!)
• The gas cylinder should have the following dimensions: 80 cm height and max.
35 cm width.
How to Connect a Gas Cylinder
• Turn the orange cap so that the arrow is pointing to the gap in the shroud.
• Remove the orange safety cap by pulling the lanyard out, then out. Do not use
tools. Leave the cap hanging.
• Check that the black sealing washer is fi tted inside the cylinder valve. Connect the
regulator to the valve.
• Turn the gas cylinder regulator clockwise and then operate the gas grill as
described.
Gas connection for model without gas cylinder compartment:
Gas Connector Hose
Connection of grill and hose
WARNING
Fire and explosion hazard! First check the connection of the gas hose
for leaks using a soap and water solution. After completion of the
installation, carry out a new leak test with soapy water on all
connections.
Gas Cylinder Regulator
Connection of gas cylinder,
regulator and hose
Hose
EN
45