Canton Sound L Kurzanleitung Seite 13

English
For devices without a mains switch, in which the mains plug or the mains socket serves as an
switching device, the plug of the mains cable or the device mains socket must be freely acces-
sible at all times. Disconnect the device from the mains during thunderstorms or prolonged pe-
riods of non-use. To completely disconnect the device from the mains, unplug the mains cable
from the wall outlet. Where the mains plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable. Always switch off the device before
connecting or disconnecting connection cables. Always pull the plugs and not the cables.
Install the device according to the manufacturer's instructions. Always choose a level surface.
The device must be in a vertical position. Do not exert force on operating elements, connec-
tions and wires.
The device may only be operated with the voltage and frequency specified on the device or the
type plate. Do not insert any objects or body parts into the openings of the device. Live parts
inside the housing could be touched and/or damaged. This can lead to short circuits, electric
shocks and fire.
Only use fixing materials and accessories that are approved by the manufacturer and/or
supplied with the device.
Only use trolleys, stands, tripods, holders or tables specified by the manufacturer or
sold with the device. When using a trolley, be careful when moving the trolley/device
assembly to prevent damage and injury from tipping over.
Only clean this device with a clean, dry cloth. Do not use any aggressive, alcoholic or abrasive
agents for cleaning.
To avoid electric shock, do not open the housing! There are no user-serviceable parts within
the device. Consult qualified personnel for all repair and maintenance work. This is required
when the device has been damaged in any way, such as mains cable or plug damage, liquid or
objects have been spilled, exposed to rain or moisture, does not operate normally, or has been
dropped. Do not make any changes to the device or accessories. Unauthorised modifications
can compromise safety, regulatory compliance or system performance. In this case, the type
approval/warranty may expire.
24
If sound distortions such as unnatural knocking, throbbing or high-frequency clicking
occur during playback, the volume level must be reduced immediately.
To avoid possible hearing damage, do not listen at high levels for long periods of
time. Interrupt the playback if you hear ringing or whistling noises in your ears or if
you have the impression that you can no longer hear high sounds (even for a short
time).
New and used batteries must be kept away from children. Devices in which the battery
compartment cannot be closed securely must not be used any longer and must be kept
away from children. The remote control supplied with this device contains a button cell
as battery. Swallowing the button cell can cause serious internal burns and thus death
in only 2 hours! Do not ingest the battery, Chemical Burn Hazard. If you think batteries
might have been swallowed or placed inside any part of the body, seek immediate
medical attention. Take care of your environment when disposing of the battery. Batte-
ries must be disposed of at a battery collection point. Do not expose batteries to high
temperatures, such as direct sunlight, fire or the like. Batteries must be inserted correct-
ly according to the polarity imprint. Incorrect insertion can lead to damage. Only use the
batteries or rechargeable batteries specified for the device. The batteries supplied are
not rechargeable batteries, i.e. these batteries must not be recharged.
The device contains permanent magnets. Do not place or lay objects that are sensitive
to magnetic fields (e.g. tube TVs, external hard drives, magnetic cards, video cassettes,
etc.) on or directly next to the device.
The device and/or the accessory may contain small parts that can be swallowed.
Therefore not suitable for children under three years.
This symbol indicates uninsulated dangerous voltages inside the case that are suffi-
ciently strong (amplitude) to cause a fire or electric shock.
This symbol warns you of important operating and maintenance instructions in the
accompanying documentation (manual) supplied.
This symbol indicates Class II devices, where protection against electric shock is
provided by double or reinforced insulation during specified use and therefore no
protective earth connection is required.
English
3 2 5