Installation - Klarstein Basel Illumine Bedienungsanleitung

INSTALLATION

Notes on packaging and assembly material
• Remove the appliance from the box.
• Please retain all packaging until you have checked and counted all the parts and
the contents of the fixing pack against the parts list.
• Place packaging inside the box and either store or dispose of safely.
• The fixing pack contains small items, which should be kept away from young
children.
• We suggest that you open the fixing pack and place all the contents into a
container, therefore reducing the risk of losing any small pieces.
Wall mounting
• Do not connect the appliance to the mains until properly fixed to the wall and the
instructions are read fully.
• The minimum distances must be observed.
• For installation of the appliance, care must be taken not to damage concealed
cables.
• Please be careful while drilling the holes.
• This appliance is designed to be permanently fixed to a wall at a minimum height
of 30 cm. The wall bracket must be fitted horizontally and the cable routed to the
bottom right of the heater.
Figure 1
EN
21