Copper Tig Welding; Technical Specifications - voestalpine Böhler Welding URANOS NX 2700 TLH Bedienungsanleitung

Welding current
30 A
60÷90 A
90÷120 A

Copper TIG welding

10. TECHNICAL SPECIFICATIONS

Electrical characteristics
Cos
* This equipment complies with EN / IEC 61000-3-11.
* This equipment complies with EN / IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the
public grid (point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low
voltage system, it is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution
network operator if necessary, that the equipment may be connected.
Duty factor
Physical characteristics
Ø electrode Gas nozzle n°
0÷30 mm 4/5
30÷120 mm 4/5/6
120÷250 mm 6/7
67
TECHNICAL SPECIFICATIONS
Gas nozzle
6/8.0 mm
6.5/8.0/9.5 mm
9.5/11.0 mm
53
25
DIGITAL DIGITAL
10.5
10.1
51
0.96
83
0.99
30.8
18
80
10.1
270
230
180
270
240
IP23S
H
18.8
5
Argon flux
EN
U.M.
Vac
53
16 A
10.5 kVA
10.1 kW
51 W
0.96
83 %
0.99
15.3 A
9 A
A
80 Vdc
10.1 kV
U.M.
270 A
230 A
180 A
270 A
240 A
U.M.
mm
Kg
mm²
m