Replacing The Interior Light Bulb; Cleaning And Care - Beko CSA31020 Gebrauchsanweisung

EN
All food should be wrapped in several layers
of newspaper and stored in a cool place (e.g.
fridge or larder).
Containers of warm water may be placed
carefully in the freezer to speed up the
defrosting.
Do not use pointed or sharp-edged
objects, such as knives or forks to remove
the frost.
Never use hairdryers, electrical heaters or
other such electrical appliances for defrosting.
Sponge out the defrost water collected in the
bottom of the freezer compartment. After
defrosting, dry the interior thoroughly (Item 8
& 9). Insert the plug into the wall socket and
switch on the electricity supply.

Replacing the interior light bulb

(Item 10)
In case that the light bulb is out of function it is
easily to replace. First make sure that the
refrigerator / freezer is disconnected from the
power supply by removing the plug. Take a
flat screwdriver and keep it carefully without
force into the left gap between lamp cover and
internal cabinet. Then press the handle of the
screwdriver carefully to the left side until you
notice that the left pin of the cover is
disengaged . Repeat this procedure on the
right gap, however now press the handle of
the screwdriver carefully to the right side. If
both sides are loosened the cover can be
removed easily.
Ensure that bulb is screwed securely in the
bulb holder. Plug the appliance into the power
supply. If the light still fails, replace E14
screw-cap type 15 Watt (Max) bulb from your
local electrical store and then fit it. Carefully
dispose of the burnt-out light bulb
immediately.
If you have changed the light bulb please fix
tСО МШЯОr aРaТЧ ТЧ Тt's ПШrЦОr ЩШsТtТШЧ. TakО
care that the cover snaps-in correctly.

Cleaning and care

1. We recommend that you switch off the
appliance at the socket outlet and pull out the
mains plug before cleaning.
2. Never use any sharp instruments or
abrasive substances, soap, household
cleaner, detergent or wax polish for cleaning.
3. Use luke warm water to clean the cabinet
of the appliance and wipe it dry.
4. Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda to one
pint of water to clean the interior and wipe it
dry.
5. Make sure that no water enters the
temperature control box.
6. If the appliance is not going to be used for
a long period of time, switch it off, remove all
food, clean it and leave the door ajar.
7. We recommend that you polish the metal
parts of the product (i.e. door exterior, cabinet
sides) with a silicone wax (car polish) to
protect the high quality paint finish.
8. Any dust that gathers on the condenser,
which is located at the back of the appliance,
should be removed once a year with a
vacuum cleaner.
9. Check door seals regularly to ensure they
areclean and free from food particles.
10. Never:
• CХОaЧ tСО aЩЩХТaЧМО аТtС uЧsuТtabХО ЦatОrТaХ;
eg petroleum based products.
• SubУОМt Тt tШ СТРС tОЦЩОraturОs ТЧ aЧв аaв,
• SМШur, rub ОtМ., аТtС abrasТЯО ЦatОrТaХ.
11. Removal of dairy cover and door tray :
• TШ rОЦШЯО tСО НaТrв МШЯОr, ПТrst ХТПt tСО cover
up by about an inch and pull it off from the
side where there is an opening on the cover.
• TШ rОЦШЯО a НШШr traв, rОЦШЯО aХХ tСО
contents and then simply push the door tray
upwards from the base.
12. Make sure that the special plastic
container at the back of the appliance which
collects defrost water is clean at all times. If
you want to remove the tray to clean it, follow
the instructions below:
• SаТtМС ШПП at tСО sШМkОt ШutХОt aЧН ЩuХХ Шut
the mains plug
• GОЧtХв uЧМrТЦЩ tСО stuН ШЧ tСО МШЦЩrОssШr,
using a pair of pliers, so that the tray can be
removed
• LТПt Тt uЩ.
• CХОaЧ aЧН аТЩО Тt Нrв
• RОassОЦbХО, rОЯОrsТЧР tСО sОquОЧМО aЧН
operations
13. To remove a drawer, pull it as far as
possible, tilt it upwards and then pull it out
completely.
5
Instruction for use