Assembly Drawings - BORETTI DAVINCI BIANCO Benutzerhandbuch

3. Assembly drawings

Step 1 - a) Loosen the four screws of the BBQ on the left side by approximately
6 mm.
b) Slide the side table over the four screws.
c) Tighten the four screws again to secure the side table.
Step 2 - a) Loosen the four screws on the right side of the frame by approximately
6 mm.
b) Slide the side burner so that the cut-outs are positioned over the screws
that you have loosened.
c) Tighten the four screws again to secure the side burner.
30