Commissioning - Kemper MaxiFil Betriebsanleitung (Original

6.4 Commissioning

WARNING
Danger due to faulty product condition.
The product must be fully installed before commissioning begins. All
doors must be closed and the necessary connections must have been
made.
1. Connect the power supply connection cable of the product to the on-
site power supply.
2. Switch the product on using the pushbutton marked "0" and "I".
3. The fan starts and the green indicator lamp on the device switch
indicates error-free operation.
If there is a fault, please refer to the "Troubleshooting" chapter.
1502762-02 - 61 -
EN