Starting The Programme; Child Lock; Changing The Programme After It Has Started - Grundig GTN 37250 G Bedienungsanleitung

Operating the product
C
Additional laundry may be loaded
/ taken out during the End Time
period. At the end of the End Time
countdown process, End Time symbol
disappears, drying process starts and
the programme duration is displayed.
The time on the display is the total of
normal drying time and End Time .
changing the end Time
If you want to change the time during
countdown:
1. Press on/off/cancel button for 3
seconds to cancel the programme. Restart
the machine and repeat the End Time
procedure for the desired time.
2. When your machine is operated for
the first time, it starts with the default
programme (wardrobe dryness for
cottons).
cancelling end Time function
If you want to cancel the End Time countdown
and start the programme immediately:
1. Press on/off/cancel button for 3
seconds to cancel the programme.
2. Press on/off/cancel button to start the
programme you have previously selected.

5.9 Starting the programme

Press Start/Pause button to start the
programme.
Start symbol will light up to indicate that
the programme has started and ":" symbol
in the middle of the remaining time will keep
flashing.

5.10 child Lock

Machine is equipped with a Child Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the on/off/cancel button
on the control panel are deactivated when the
Child Lock is active.
In order to activate the Child Lock, press
Audio Warning, Child Lock button for 3
seconds.
Dryer / User Manual
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child Lock should be
deactivated. Press the same button for 3
seconds again to deactivate the child
Lock.
C
Lock symbol will appear on the
display when the Child Lock is
activated.
C
Child Lock is deactivated when the
machine is switched off and on with
on/off/cancel button.
When the Child Lock is activated:
Display symbols will not change even if
ƒ
the position of Programme Selection knob
is changed while the machine is running
or in halt.
If the Child Lock is deactivated after
ƒ
changing the position of the Programme
Selection knob while the machine is
running, the machine stops and new
programme information is displayed.
5.11 changing the programme
after it has started
After the machine starts, you can change the
selected programme and dry your laundry in
a different programme.
1. If you want to select Extra Dry programme
instead of Iron Dry programme, for
instance, press the Start / Pause button
for 1 second to stop the programme.
2. Select Extra Dry programme by turning
the Programme Selection knob.
3. Press the Start/Pause button to start the
programme.
53 / 64 EN