Sony BKM-243HS Bedienungsanleitung Seite 7

Specifications
General
Voltage +3.3 V, +5 V (supplied from
the main unit)
Power consumption
Approx. 2 W
Operating conditions
Temperature
0
°C to 35°C (32°F to 95°F)
Optimum temperature
20
°C to 30°C (68°F to 86°F)
Humidity 0% to 90% (no condensation)
Pressure 700hPa to 1060 hPa
Storage and transport conditions
Temperature –20°C to +60°C (–4°F to +140°F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Maximum external dimensions (w/h/d)
100 × 20 × 162 mm
(4 × 13
Mass Approx. 250 g (8.8 oz)
Input/output connectors
Digital input BNC × 2, with monitor output
connector
For information about available signal formats,
see the operating instructions for the main unit to
which the adaptor is installed.
Signal characteristics
Digital component signals
Sampling frequency
D1-SDI: Y/R-Y/B-Y: 13.5 MHz
HD-SDI: Y/P
Quantization
10bits/sample
MONITOR OUT
Output signal amplitude:
800 mVp-p ± 10%
Output impedance:
75-ohms unbalanced
Transmission distance
D1-SDI: 200 m (approx. 656 ft) max.
(When using 5C-2V coaxial
cables (Fujikura. Inc.) or
equivalent.)
HD-SDI: 100 m (approx. 328 ft) max.
(When using 5C-FB coaxial
× 6 1
/ / inches)
16 2
/P : 74.25 MHz
B R
cables (Fujikura. Inc.) or
equivalent.)
Supplied accessories
Operating Instructions (1)
Design and specifications are subject to change
without notice.
Note
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE
FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT
ON ACCOUNT OF THE LOSS OF PRESENT
OR PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER DURING
THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR
FOR ANY OTHER REASON
WHATSOEVER.
7