Sony BKM-243HS Bedienungsanleitung Seite 6

Overview
The BKM-243HS HD/D1- SDI Input
Adaptor is a video signal input adaptor for
Sony professional monitors. When installed
in an input option slot on the main unit, it
provides video input and output connectors
for the main unit and a decoder for HD/D1
serial digital component signals.
Function
Decoder for serial digital component
signals
The BKM-243HS is equipped with a built-in
decoder for serial digital component signals.
Serial digital input and output signal
connector
The BKM-243HS is equipped with two
input and one monitor output connectors for
serial digital signals.
Using the Input and Output
Connectors
For information about installing the BKM-
243HS in an input option slot on the main
unit, see the operating instructions for the
main unit.
Configuration of Input/Output
Connectors and Signals that may be
Input
The configuration of the input and output
connectors, and the signals that may be input
are shown below.
1
1 2
INPUT
1 Input serial digital component signals.
2
Output serial digital component monitor
signals.
6
2
BKM-243HS
DIGITAL/HD SDI
MONITOR OUT
Input of serial digital component
signals
You can input serial digital signals to
connectors 1 and output signals displayed
on the screen of the main unit or the monitor
from connector 2.
You need not attach the 75-ohm termination
to connector 2.
Notes
• The MONITOR OUT signal is not output
only when the power of the main unit is ON.
The MONITOR OUT signal is not output
when the monitor is in standby mode.
• The MONITOR OUT signal does not
comply with ON-LINE signal specifications.