Mounting And Operation; After-Sales Service And Application Service - Bosch Rotak 32 Ergoflex Originalbetriebsanleitung

Downloaded from www.Manualslib.com
OBJ_BUCH-1739-002.book Page 14 Thursday, November 27, 2014 8:14 AM
14 | English

Mounting and Operation

Action Figure
Delivery Scope 1
Handle Assembly 2
Snap together the Grassbox 3
Grassbox fitting/removing 3
Adjusting the Cutting Height 4
Connecting the Extension Lead 5
Troubleshooting
TOP
Problem Possible Cause
Motor refuses to start Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Possible clogging
Motor protector has activated
Mowing too low for the conditions
Machine functions Extension cable damaged
intermittently
Internal wiring of machine damaged
Motor protector has activated
Machine leaves ragged finish Height of cut too low
and/or
Cutting blade blunt
Motor labours
Possible clogging
Blade fitted upside down
Blade not rotating while garden Cutting blade obstructed
product switched on
Blade nut/bolt loose
Excessive vibrations/noise Blade nut/bolt loose
Cutting blade damaged
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
F 016 L81 169 | (27.11.14)
manuals search engine
Page Action
188 Starting
188 Stopping
188 Working Advice
188 Blade Maintenance
189 Selecting Accessories
189
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Allow motor to cool and increase height of cut
Increase height of cut
Inspect cable, replace if damaged
Contact Service Agent
Allow motor to cool and increase height of cut
Increase height of cut
Replace the blade
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Refit blade correctly
Switch off garden product
Clear obstruction (always wear protective
gloves)
Tighten blade nut/bolt (17 Nm)
Tighten blade nut/bolt (17 Nm)
Replace the blade
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Figure Page
5 189
5 189
5 – 6 189 – 190
7 190
7 190
Bosch Power Tools