Mounting And Operation; After-Sales Service And Application Service - Bosch UniversalRotak 650 Originalbetriebsanleitung

16 | English

Mounting and Operation

Action
Delivery scope
Unfolding the handle
Handle assembly
Grassbox fitting/removing
Setting the height of cut
Troubleshooting
STOP
Problem Possible Cause
Motor refuses to start Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty / blown
Grass too long
Motor protector has activated
Garden tool functions Extension cable damaged
intermittently
Internal wiring of garden tool defective
Motor protector has activated
Machine leaves ragged Height of cut too low
finish
Cutting blade blunt
and/or
Possible clogging
Motor labours
Blade fitted upside down
Blade not rotating Cutting blade obstructed
while garden product
switched on
Blade nut/bolt loose
Excessive vibrations/ Blade nut/bolt loose
noise
Cutting blade damaged
After-Sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
1 609 92A 5W8 | (15.07.2020)
Action
Switching on
Figure Page
Working advice "mowing"
A 240
Switching off
B 241
Working Advice
Level indicator, grassbox empty/full
C 242
Blade maintenance/Blade replacement
D 243
Selecting accessories
Corrective Action
Turn power on
Use another socket
Check the cable and if damaged, have it replaced
by an electrician or at the Bosch Service Center.
If fuse blows continuously, please check your
electricity supply system or contact Bosch cus-
tomer service agent
Max. allowed grass height 30 cm on highest
height-of-cut setting
Allow motor to cool and increase height of cut
Check the cable and if damaged, have it replaced
by an electrician or at the Bosch Service Center.
Contact Bosch customer service agent
Allow motor to cool and increase height of cut
Increase height of cut
Replace cutting blade (see figure H).
Check underneath the garden product and clear
out as necessary (always wear protective gloves)
Refit blade correctly
Switch off garden product
Clear obstruction (always wear protective gloves)
Tighten blade nut/bolt (22 Nm)
Tighten blade nut/bolt (22 Nm)
Replace cutting blade (see figure H).
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
Figure Page
E 244
E 244
E 244
F 245
G 246
H 247
I 247
Bosch Power Tools