Mounting And Operation - Bosch Rotak 32 Originalbetriebsanleitung

Downloaded from www.Manualslib.com
OBJ_BUCH-1266-005.book Page 14 Wednesday, November 19, 2014 3:12 PM
14 | English
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
19.11.2014
Troubleshooting
TOP
Problem Possible Cause
Motor refuses to start Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Possible clogging
Motor protector has activated
Mowing too low for the conditions
Machine functions Extension cable damaged
intermittently
Internal wiring of machine damaged
Motor protector has activated
Machine leaves ragged finish Height of cut too low
and/or
Cutting blade blunt
Motor labours
Possible clogging
Blade fitted upside down
Blade not rotating while garden Cutting blade obstructed
product switched on
Blade nut/bolt loose
Excessive vibrations/noise Blade nut/bolt loose
Cutting blade damaged
F 016 L81 165 | (19.11.14)
manuals search engine

Mounting and Operation

Action Figure
Delivery Scope 1
Handle Assembly 2
Snap together the Grassbox 3
Grassbox fitting/removing 3
Adjusting the Cutting Height 4
Connecting the Extension Lead 5
Starting 5
Stopping 5
Working Advice 5 – 6
Blade Maintenance 7
Selecting Accessories 7
Corrective Action
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Allow motor to cool and increase height of cut
Increase height of cut
Inspect cable, replace if damaged
Contact Service Agent
Allow motor to cool and increase height of cut
Increase height of cut
Replace the blade
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Refit blade correctly
Switch off garden product
Clear obstruction (always wear protective
gloves)
Tighten blade nut/bolt (17 Nm)
Tighten blade nut/bolt (17 Nm)
Replace the blade
Page
185
185
185
185
186
186
186
186
186 – 187
187
187
Bosch Power Tools