IKEA VINTERKALL Benutzerhandbuch Seite 14

ENGLISH
Switching on
Connect the mains plug to the power socket.
The display on the control panel turns on.
To change temperature, refer to the section for
temperature regulation.
When operating the appliance for the first time,
set the appliance at a colder temperature and
run it without loading any food until it auto
stops at the set temperature. Usually it takes
2 or 3 hours, then set a desired temperature and
put food in the appliance.
Switching off
To disconnect the appliance from the power
supply, disconnect the mains plug from the
power socket. The display on the control panel
turns off.
Locking/unlocking
• If the door is closed and no button
operation occurs for 30 seconds, the control
panel will be locked and the
indicator on the display will turn off. When
2
the unlock indicator turns off, button
operation is invalid.
• To lock or unlock the control panel, press
7
and hold the
control panel for 3 seconds. When the
control panel is unlocked, the
indicator on the display turns on and button
operation is available.
Temperature regulation for refrigerator
compartment
• The refrigerator compartment temperature
ranges from 2°C to 8°C, and the default
temperature is 5°C.
4
• Press the Refrigerator temperature
button on the control panel to change the
refrigerator compartment temperature.
To manually adjust the temperature of the
refrigerator compartment, deactivate the
following functions:
8
super freezing and
Temperature regulation for freezer
compartment
• The freezer compartment temperature
ranges from -16°C to -24°C, and the default
temperature is -18°C.
2
unlock
Unlock button on the
2
unlock
9
super cooling,
3
auto mode.
5
• Press the Freezer temperature button
on the control panel to change the freezer
compartment temperature.
To manually adjust the temperature of
the freezer compartment, deactivate the
following functions:
8
super freezing and
Adjust the temperature setting by keeping in
mind that the temperature inside the appliance
depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance
Important! If the ambient temperature is
high or the appliance is fully loaded, and the
appliance is set to the lowest temperatures, it
may run continuously causing frost to form on
the rear wall. In this case a higher temperature
must be set to allow automatic defrosting and
therefore reduced energy consumption.
Super cooling function
• To activate the function, press the
button on the control panel until the
9
super cooling indicator turns on.
• When the function is activated, the
refrigerator compartment temperature is
automatically fixed at 2°C.
• To deactivate the function, press the
6
Mode button to select another function.
9
The super cooling indicator turns off.
Super freezing function
• To activate the function, press the
button on the control panel until the
8
super freezing indicator turns on.
• When the function is activated, the freezer
compartment temperature is automatically
fixed at -24°C.
• To deactivate the function, press the
6
Mode button to select another function.
8
The super freezing indicator turns off.
14
9
super cooling,
3
auto mode.
6
Mode
6
Mode