Connecting The Print Server To The Network - SEH PS104 Schnellinstallationsanleitung

Connecting the Print Server to the Network

1. Connect the network cable (RJ-45) to the print server.
2. Connect the power cord to the print server.
3. Connect the power cord to the printer.
4. Turn the printer on.
In order to verify the installation you can print a status page. To do this, press the
print server's button for a short time.
A status page can only be printed if the printer supports the data formats ASCII,
PostScript, DATAMAX (label printer), or Citizen-Z (label printer).
12
Proceed as follows:
[en] Quick Installation Guide