Herunterladen Inhalt Inhalt Diese Seite drucken

Remington X Serie Bedienungsanleitung Seite 5

Vorschau ausblenden Andere Handbücher für X Serie:
Inhaltsverzeichnis

Werbung

INSTRUCTIONS FOR USE
BEFORE STARTING THE CUT
Inspect the clipper making sure that it is free from hair and dirt.
Seat the person so that their head is approximately at your eye level.
Before cutting, always comb the hair so it is tangle free and dry.
TO ATTACH A COMB
Hold the comb with its teeth upward.
Align the legs of the comb with the holes in the top of the clipper on each side of the
blade and slide the legs into the trimmer until they click (Fig B).
To remove, firmly pull the comb straight up away from the clipper.
SETTING THE LENGTH OF CUT
Your clipper comes with three adjustable combs 3 to 13 mm, 14 to 24 mm and 25 to 35
mm.
These provide a length of cut that can be adjusted between 3 and 35 mm in increments
of 1 mm.
1. Select the comb that fits the range of cut you want to achieve.
2. Fit the comb then rotate the length adjustment dial until the length you want appears
in the length selection window for that comb.
3. The length setting colour on the wheel matches the length marker colour on the comb.
4. For example, if you want a cut length of 20 mm, fit the 14 to 24 mm comb then turn the
dial until 20 appears in the length setting window for the 14 - 24 mm comb.
5. Use the clipper without any fixed combs for trimming hair close to the skin.
6. This will trim hair to 1mm, holding the clipper so the blades are perpendicular to the
skin will trim hair to 0.5mm.
INSTRUCTIONS FOR CUTTING HAIR
For even cutting, allow the comb attachment/blade to cut its way through the hair. Do
not force it through quickly. If you are cutting for the first time, start with the maximum
comb attachment.
STEP 1 – NAPE OF THE NECK
Set the comb to 3 mm or 6 mm.
Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of
the head at the base of the neck.
Slowly lift the clipper, working upwards and outwards through the hair, trimming just a
little at a time.
STEP 2 – BACK OF THE HEAD
With the comb set at 12 mm or 18 mm, cut the hair at the back of the head.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
SR
UA
BG
AE
5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

X4 power hc4000

Inhaltsverzeichnis