EUROM Flow 250 Bedienungsanleitung Seite 16

Where can the pump be used?
This submersible pump has been designed for private usage in or around the home
and garden. Submersible pumps are primarily used for draining water, moving
water and emptying water reservoirs, cellars, boats etc., and also for temporary
circulation of water.
Note: these pumps may not be used in a swimming pool!
The pumps are completely watertight and can be submerged in liquid with a
maximum depth of 5 or 8 metres (see technical specifications).
The submersible pump is suitable for use with the following liquids:
Type Flow 250: clean water and soapy water
Type Flow 400: clean and lightly soiled water and soapy water
Type Flow 750: clean and lightly soiled water and soapy water
Corrosive, lightly flammable or explosive liquids (such as petrol, diesel, paraffin,
thinners etc), fats, oil, salty or contaminated water from toilets etc. cannot be
pumped! Bear in mind that sand and all other abrasive and corrosive substances
will increase wear and tear and impact upon the effectiveness of the pump.
The temperature of the pumped liquids must not exceed 35°C.
This pump is not suitable for continuous use, such as the continual circulation of
water. This type of use will substantially shorten the pump's life expectancy.
Description
16