Konig + Neurath LIFE.S Konferenz Montageanleitung Seite 40

Safety instructions
Lay the hand that is not operating the table on the table top
„two-handed operation".
Make sure that no-one is at or under the table when lifting
and lowering.
During lowering make sure that no objects such as waste
bins or pedestals become wedged under the table.
As soon as the electronic collision protection has stopped
the electric height-adjustable table from moving, you can
then only adjust the table top in the opposite direction (the
safety feature initially prevents you from adjusting the table
in the same direction as triggered it).
To prevent the risk of crushing and shearing, the table and
all of its moving parts (incl. attachments and accessories)
must have a clearance of at least 25mm to adjacent objects.
When lowering past the programmed safety stop, note that a
pinch point can arise between the table top frame, cable tray
and the motor strut.
Caution! Tables are more liable to tipping in the highest posi-
tion than in the lower ones.
The max. permissible net load is 80 kg.
The table is not suitable for transporting people.
37