EN
3. Assembly instructions
STEP 1
Secure front stabilizer set (3) to main frame (1) and fix it with Inner Hex Bolt (8) and washers (9). Secure rear
stabilizer set(2) to main frame (1) and fix it with Inner Hex Bolt (8) and washers (9)
STEP 2
Slide front post (4) into main frame (1) and tighten the spring knob (14) to secure. Attach handber (5) to front
post (4) and fix it with L Shaped knob (68) and waher (50). Fix computer holder (81) onto handlebar (5) and
lock it with screw (80). Fix computer (82) to computer holder (81) and then insert computer cable (79) into the
hole on the back side of computer(82).
51