Sony VPL-CX236 Kurzreferenz Seite 46

Correcting the image twist (Warp correction feature)
You can correct the image twist by the warp correction feature
1 Press KEYSTONE on the remote
commander three times, or select
"Warping" in the INSTALL SETTING
menu, and select "Adjust."
2 The guide is displayed.
The corners of the image to be corrected
1 Move the s by using V/v/B/b to select
the corner you want to correct.
If you press ENTER, you will go back to
the cursor display.
2 Adjust the position of the corner you want
to correct by using V/v/B/b.
3 The cursor will disappear if the
adjustment range limit is reached.
Press the RESET key to restore the projected image before adjustment.
18
GB
Projecting an Image
Adjust using this cursor.
Example of cursor display:
You can adjust in all directions.
You can adjust only to the left/
right or downwards.