Pkm 8099 IS Bedienungsanleitung Seite 60

Downloaded from www.Manualslib.com
13. Insert the extension tube in the 170 mm-hole and lead it outwards( fig. 3 ).
14. Fix the inside chimney with 4 screws type ST4*8 onto the suspension device.
Push the outside chimney on the inside chimney. Use the S-hook to hold the
chimney while installing it.
15. Fix the chimney with 4 screws type ST4*8.
16. You need at least two persons to lift the hood. Fix the hood with 16 screws type
M4*10 onto the angle irons.
17. Now pull the extension tube and fix it. Ensure that there are not any gaps.
Remove the S-hook and pull the outside chimney at its proper position.
manuals search engine
60