Troubleshooting - ZANKER KOU10412XB Benutzerinformation

Step 5 Turn the fasteners by 90° and remove
them from their seats.
Step 7 Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass panels
in the dishwasher.
Step 8 After cleaning, install the glass panel and the oven door.
When installed correctly the door trim clicks.
Make sure that you install the internal glass panel in
the seats correctly.
How to replace: Lamp
Warning! Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

Troubleshooting

Warning! Refer to Safety chapters.
30
90°
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Step 6 First lift carefully and then remove the
glass panel.
Put a cloth on the bottom of the cav-
What to do if...
In any cases not included in this table please contact
with an Authorised Service Centre.
2
1
Step 3
ity.
A