Breitling COLT CHRONOGRAPH II Bedienungsanleitung Seite 13

III. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
allows you to follow the measurement in seconds.
2. to interrupt the measurement, press pushpiece A
once more. to restart the time measurement, press
pushpiece A. this procedure makes it possible to
add several short times.
3. the chronograph is reset to zero by pressing push-
piece B, once the final measurement has been stopped.
20
ADJUSTING ADDITIONAL FUNCTIONS
if a totalizer hand does not return to zero normally (after a battery change
or inappropriate handling), proceed in the following manner:
1. Desynchronized hour totalizer: with the crown in posi-
tion 2, press pushpiece A repeatedly until the hand
returns to the initial position.
2. Desynchronized minute totalizer: with the crown in
position 2, press pushpiece B repeatedly until the
hand returns to the initial position.
3. Desynchronized seconds totalizer: with the crown in
position 3, press pushpiece A repeatedly until the
hand returns to the initial position.
4. Desychronized 1/10th of a second totalizer: with the
crown in position 3, press pushpiece B repeatedly
until the hand returns to the initial position.
A
B
21
2 3