Using The Chronograph - Breitling COLT CHRONOGRAPH II Bedienungsanleitung

USING THE CHRONOGRAPH

I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. the measurement is done in hours (totalizer 1),
minutes (hand 2), seconds (hand 3) and 1/10ths of a
second (totalizer 4).
3. return the chronograph to zero by pressing push-
piece B.
18
II. M
EASURING A SHORT TIME WITH SPLIT TIME
1. Press pushpiece A to start the chronograph. Hand 3
shows the measurement in seconds.
2. to check an intermediate or split time without inter-
rupting measurement of the total time, press push-
piece B.
3. to return to the display of the time being measured,
press pushpiece B: hand 3 measuring the seconds,
and if necessary hand 2 measuring the minutes, will
then "catch up" with the measured time.
19