Functional Description - Pfannenberg PWI 6302C/ 115 V Betriebsanleitung

GB
2.4

Functional description

Pos Designation
1 Air/ water heat exchanger
3 Solenoid valve
5 Water outlet
Cooling function process
•
The warm interior air of the switch cabinet is blown by the fan (2) over the air/ water heat exchanger (1) and
cools off.
•
In correspondence with the selected setpoint temperature, a solenoid valve (3) regulates the cooling water flow
(4)/(5), and thus the cooling capacity. The cooled air is then diverted back into the ambient air.
•
Condensing water must be diverted through the condensate drain (6) and is collected in a
bottle. This condensate collecting bottle is available as an accessory from Pfannenberg.
 For Pfannenberg part numbers for accessory orders, see Ordering of
Operating manual PWS and PWI 6302 C 086100048 © Pfannenberg GmbH
1
6
5
Figure 3 - Refrigerant circuit
Pos Designation
2 Fan
4 Water inlet
6 Condensation drain
accessory
2
3
4
condensate collecting
parts .
Page 6 / 31