Installation - Leonard LBN1110 Benutzerinformation

Problem
The appliance does not heat
up.
The oven lamp does not oper-
ate.
Steam and condensation settle
on the food and in the appli-
ance.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

Warning! Refer to the Safety chapters.
Possible cause
The fuse in the fuse box is re-
leased.
The oven lamp is defective.
You left the dish in the appli-
ance for too long.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
Remedy
Do a check of the fuse. If the
fuse is released more than one
time, contact a qualified electri-
cian.
Replace the oven lamp.
Do not let the dishes stay in the
appliance for more than 15-20
minutes after the cooking ends.
.........................................
.........................................
.........................................
50
leonard 25