Service Data; Installation - Leonard LBN1113X Benutzerinformation

18 Leonard
Problem
The lamp does not operate.
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "12.00".

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING! Refer to Safety
chapters.
Building In
min. 550
20
600
min. 560
9
3
Possible cause
The lamp is defective.
You left the dish in the oven
for too long.
There was a power cut.
540 21
558
114
19
589
570
598
594
Remedy
Replace the lamp.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Reset the clock.
on the front frame of the oven cavity. Do
not remove the rating plate from the oven
cavity.
.........................................
.........................................
.........................................
min. 550
20
590
min. 560
9
3
540 21
558
114
19
589
570
598
594