Herunterladen Inhalt Inhalt Diese Seite drucken

Hints And Tips - JUNO JKSI808R9 Benutzerinformation

Vorschau ausblenden Andere Handbücher für JKSI808R9:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. The display
comes on and goes off.
3. Touch
for 3 seconds.
4. Touch
a few times until
on.
5. Touch
of the Timer to select an
automatic mode.
To operate the hood directly on
the hood panel deactivate the
automatic mode of the function.
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After that
time the system deactivates the
fan automatically and prevents
you from accidental activation
of the fan for the next 30
seconds.
Operating the fan speed manually
You can also operate the function
manually. To do that touch

HINTS AND TIPS

WARNING! Refer to Safety
chapters.
Cookware
For induction cooking zones a
strong electro-magnetic field
creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer bottom
(with a correct marking from a
manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
hob is active. This deactivates automatic
operation of the function and allows you to
change the fan speed manually. When
you press
one. When you reach an intensive level
and press
comes
to 0 which deactivates the hood fan. To
start the fan again with fan speed 1 touch
.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 – H6.
when the
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
• a magnet pulls on to the bottom of the
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the cookware
automatically.
The cooking zone efficiency is related to
the diameter of the cookware. The
you raise the fan speed by
again you will set fan speed
To activate automatic operation
of the function, deactivate the
hob and activate it again.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
to the highest heat setting.
cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on the
hob surface.
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis