Operation; Hanging On / Removing The Grass Box; Adjusting The Cut Height; Switching On And Off - Grizzly ERM 1030 G Originalbetriebsanleitung

2. Connect the handle (15) in one
of the two pieces of the collec-
tion box (16).
Do not work with the lawnmower
without the collision guard or lawn
box. There is a risk of injury.

Operation

Hanging On / Removing the
Grass Box
1. To hang on the grass box (4), lift
E
the collision guard (7) and hang
on the grass box. Fold the col-
lision guard (7) onto the grass
box (4). It holds the grass box in
the correct position.
2. To remove the grass box (4),
lift the collision guard (7) and
detach the grass box. Fold the
collision guard (7) back onto the
mower housing (6).

Adjusting the Cut Height

Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
The lawn mower can be adjusted to the
following cutting heights by changing the
position of the wheels:
60 mm - Tall cutting height
45 mm - Medium cutting height
30 mm - Short cutting height
F 1. Unscrew the wheels (5).
2. Firmly re-secure the wheels
(5) in the required position. All
wheels must be adjusted at the
same level.
The correct height is around 30 � 45 mm
for a decorative lawn and around
mm for a used lawn.
A higher cut height should be se-
lected for the first cut of the season.
Observe the noise protection and
local regulations.

Switching On and Off

G
1. Insert the power cable plug into
the socket (9) on the curved
handle (1).
2. To relieve the strain, form a loop
with the end of the power cable
and hang this into the strain re-
lief (11). See the diagram
3. Connect the equipment to the
power supply.
4. Before switching on, ensure that
the equipment is not in contact
with any objects.
5. To switch on, press the release
button (10) on the handle at the
same time as pressing the start
lever (12). Release the release
button (10).
6. To switch off, release the start
lever (12).
After switching off the equipment, the
blade continues to turn for several
seconds. Do not touch the moving
blade. There is a risk of injury.

Working with the Lawnmower

Regular mowing encourages increased fo-
liation of the grass and kills off weeds at the
same time. Therefore, not only does each
mowing increase the density of the lawn, it
also produces an evenly resilient lawn.
GB
45 - 60
H
.
43