Eschenbach vario DIGITAL FHD Advanced Bedienungsanleitung Seite 44

Enabling/disabling the overview display
Select this icon to disable the overview display function. If you would like to enable the
overview display again, press the
Changing the timeout settings
As standard, the device switches off automatically after approx. 15 minutes if it is not
used. Select this icon and press the
8 hours.
Enabling/disabling the blue filter
The blue filter is disabled as standard. Select this icon and press the
want to enable it.
If the blue light filter is enabled, the amount of blue light is reduced. The display be-
comes more yellow and the colors appear softer.
Saving settings, loading and restoring factory settings
Select this icon and press the
volume, activated false colors, LED settings, etc.:
- The first function allows you to save your current settings.
- This function loads the settings you saved previously. The requirement for this is
that settings were saved previously.
Tip: Once you have set your device up for the first time you can restore your personal
configuration using these two functions.
- This function allows you to reset the device to the default settings if required. All
settings will then be as set at the default settings.
button e again.
button e to extend this period to approximately
button e to manage menu settings such as language,
- 39 -
button e if you
EN