CONSTRUCTA CC4P91560 Gebrauchsanleitung Seite 25

Controls
Here you can find a short explanation of the various
touch fields. You can set your appliance simply and
directly.
Touch fields and their functions
Here you can find a short explanation of the various
touch fields.
Touch Function
fields
Symbol
90 Select a microwave power output of 90 watts
180 Select a microwave power output of 180 watts
360 Select a microwave power output of 360 watts
600 Select a microwave power output of 600 watts
900 Select a microwave power output of 900 watts
Select an automatic programme
=
Select a weight for the programmes
A
Setting the time
0
#
Aquaclean
Activate the cleaning function
Start operation
I
Select the memory
f
Stop or pause operation
II/ Ø
Open the appliance door
B
--------
Control panel
The control panel functions like a scroller. Swipe left or
right with your finger to change the setting. The faster
you swipe, the faster the scroller will move. Tap on the
scroller to stop it and select an exact setting.
Automatic door opening
The appliance door springs open if you activate the
automatic door opening. You can fully open the
appliance door manually.
The automatic door opening does not work in the event
of a power cut. You can open the door manually.
Notes
If you open the appliance door during operation, the
■
operation is paused.
When you close the appliance door, the operation
■
does not continue automatically. You must restart
the operation manually.
If the appliance has been switched off for a long
■
time, the appliance door will open after a time delay.
Getting to know your appliance
Cooling fan
The appliance is equipped with a cooling fan. The fan
may run on even if the oven has been switched off.
Notes
The cooking compartment remains cold during
■
microwave operation. The cooling fan will still switch
on. The fan may run on even when microwave
operation has ended.
Condensation may appear on the door window,
■
interior walls and floor. This is normal and does not
adversely affect microwave operation. Wipe away the
condensation after cooking.
Changing the signal length
You will hear a signal when the appliance is switched
off. You can change the length of the signal tone.
Touch and hold the field for approx. 6 seconds.
I
The new signal length will be applied.
The clock will reappear.
The following are possible:
Short signal length – 3 tones
Long signal length – 30 tones.
en
25