Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher CLUB Bedienungsanleitung

Suppentopf
Vorschau ausblenden Andere Handbücher für CLUB:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Set the appropriate temperature for the food product. The adjustable energy control
(1-12) ensures the contents of the soup kettle are heated evenly. The control light
shines during the heating phase.
The heating time depends on the amount and temperature of food and temperature
of water in the outer pot.
Warm food can be removed from the soup kettle and served as needed.
After removing food, close the lid to avoid heat loss.
When finished using the device, turn the energy control to the position marked "0"
and unplug the device from its socket.
The device is equipped with a function preventing it from operating when dry.
If the device is accidentally turned on without water or with too little water, the safety
mechanism will be activated and the device will be automatically shut off. In this case,
turn the device off and wait for it to cool. After cooling, fresh water may be poured in
and the device can be used normally.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Attention! During washing and operation of the device do not immerse its electric
parts in water or other liquids. Never put the device under running water.
o After each use, wash the inner and outer pots and the carrying ring, as food, spices
and salt are aggressive and may damage the device.
o Set the temperature dial to "0" and remove the device's plug from its socket.
Wait for the device to cool.
o Remove the inner pot. Wash the lid, carrying ring and inner pot with a soft cloth and
mild cleaning agent.
- 26 -

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis