Installation And Connection; Operation - Bartscher CLUB Bedienungsanleitung

5.2 Installation and connection

•
Unpack the device and remove all packing material.
•
Put the device on a level, stable surface capable of supporting its weight.
•
Never put the device on a flammable surface (tablecloth, carpet, etc.).
•
Never put the device in a moist or wet environment.
•
Do not put the device near an open flame, electric oven, heater or other source of
heat.
•
Ensure the device is not placed near any flammable materials. Danger of fire!
•
Ensure a safe distance is maintained from all walls, shelves, etc. for proper
circulation of warm air emitted by the device.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
•
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.

5.3 Operation

The soup kettle consists of a heated outer pot with thermostatic control, a removable
stainless steel inner pot and a carrying ring, which is set on top of the outer pot.
The device is provided with a rotary and foldaway stainless steel lid with a ladle cut-out
and a heat-insulated handle.
The lid locks into three different positions:
closed:
fold-up:
opened sideways:
- 24 -
for quick, economic heating
for serving of foods
for filling in foods