Installation And Connection; Operating - Bartscher 500.831 Bedienungsanleitung

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
•
Not at any time you should place the device on top of an inflammable surface (such
as: table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operating

•
Clean the device thoroughly before using for the first time
(see chapter 6.2 "Cleaning").
•
Attach the enclosed cover handle to the designated brackets, at the back of the
device.
CAUTION!
Never use the device without water!
Ensure that the water level is not below the marking on the container.
Do not fill with too much water, as the food containers must be not allowed to float.
NOTE!
Fill the water containers with warm water, as this saves time and energy!
•
Fill the suitable Gastronorm containers with the desired warm food and place them in
the water container.
WARNING! Risk of burns!
Ensure that no liquids spill over while the device is in operation!
To avoid injury, do not overfill the food container!
•
Connect the device to a suitable single mains socket.
- 21 -